ECS 915G-M5 DRIVER DOWNLOAD

June 21, 2018 Relationship

You should leave the items on this page at their default values unless you are very familiar with the technical specifications of your system hardware. If the clip of the cooling fan scrapes across the motherboard, you may cause serious damage to the motherboard or its components. TM2 Bus Ratio 0X This item helps you to set the frequency bus ratio of the throttled performance that will be initiated when the on-die sensor goes from not hot to hot. Setting Jumpers Use the motherboard jumpers to set system configuration options. Checking Jumper Settings The following illustration shows the location of the motherboard jumpers. Boot Other Device Enabled When enabled, the system searches all other possible locations for an operating system if it fails to find one in the devices specified under the First, Second, and Third boot devices. Installing a Floppy Diskette Drive The motherboard has a floppy diskette drive FDD interface and ships with a diskette drive ribbon cable that supports one or two floppy diskette drives.

Uploader: Felabar
Date Added: 21 September 2007
File Size: 64.22 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 16164
Price: Free* [*Free Regsitration Required]

Make sure that your case supports all the features required.

Jumpers with more than one pin are numbered. Neither this manual, nor any ecs 915g-m5 the material contained herein, may be reproduced without written consent of the author.

RAM & SSD Upgrades | Elite Group (ECS) G-M5 () |

TXT or something similar. Page 12 Memo Introducing ecs 915g-m5 Motherboard If you change the values incorrectly, you may introduce fatal errors or 195g-m5 instability into your system.

The following screen appears: Refer to 951g-m5 following: If the clip of the cooling fan scrapes across the motherboard, you may cause serious damage to the motherboard or its components. Check the box next to the items you want to install.

Page 40 Boot Other Ecs 915g-m5 Enabled When enabled, the system searches all other possible locations for an operating system if it fails to find one in the devices specified under the First, Second, ecs 915g-m5 Third boot devices.

Load Fail-Safe Defaults Option This option opens a dialog box that lets 915gm-5 install fail-safe defaults for all appropriate items in the Setup Utility: Frequency Control Frequency Control This item enables you to set the clock ecs 915g-m5 and system bus for ecs 915g-m5 system.

Installing Add-on Cards The slots on ecs 915g-m5 motherboard are designed to hold expansion cards and connect them to the system bus.

Click Next run the Installation Wizard. Connecting Case Components Connecting Case Components After you ecs 915g-m5 installed the motherboard into a case, you can begin con- necting the motherboard components.

It ecs 915g-m5 you to attach a line-in cable when your rear line-in jack is set as line out port for 4- channel function. Enter text from picture: Refer to ecs 915g-m5 table below for information: By pressing ‘print’ button you will print only current page.

Auxiliary-in connector This connector is an additional line-in audio connector. Ecs 915g-m5 the instructions on the screen to install the items. With so many variations ecs 915g-m5 memory, it’s important to understand just exactly what will work — and what won’t — in your system. Using the Memory Advisor or Scanner on Crucial.

Ecs 915G-M5 Manual

ecs 915g-m5 You should leave the items on this page at their default values unless you are very familiar with the technical specifications of ecs 915g-m5 system hardware.

Boot Up Floppy Seek Disabled If this item is enabled, it checks the size of the 915t-m5 disk drives at start-up time.

Select from the menu which software you want to install. Page of 94 Go. Install 915gm-5 BIOS as follows: Boot Other Device Enabled When enabled, ecs 915g-m5 system searches all other possible locations for an operating system if it fails to find one in the devices specified under the First, Second, and Ecs 915g-m5 boot devices.

Setup Tab Setup Click the Setup button to run the software installation program.

Ecs 915G-M5 Manuals

Ensure that the edge connector ecs 915g-m5 correctly seated in the slot. You may set the bus ratio number ecs 915g-m5 Page 57 Click Next. New BIOS provides support for new peripherals, improvements in performance, or fixes for known bugs.